| Voodoo3 F4 Benchmark Comparison
by Bubba "Masterfung" Wolford and Pierre "Papadoc" Legrand |
CPU, Bus speed, type of 3D card plus Ram type and amounts. |
F4 Config All sliders left
Gouraud Shading off Player Bubble7 640x480 LOW DETAIL |
F4 Config All sliders
right Gouraud Shading on Player Bubble1 640x480 HIGH DETAIL |
F4 Config All sliders left
Gouraud Shading off Player Bubble7 800x600 LOW DETAIL |
F4 Config All sliders
right Gouraud Shading on Player Bubble1 800x600 HIGH DETAIL |
| Voodoo 3-3000
Glide Celeron 4.5x100=450 Falcon Version 1.06 |
34.45 | 19.71 | 30.06 | 18.01 |
| Voodoo 3-3000
Direct3D Celeron 4.5x100=450 Falcon Version 1.06 |
37.11 (1) | 15.82 | ||
| CL 3D Blaster
Banshee Celeron 300a @ 464MHz 256 MB PC-100 RAM |
29.93 (1) | 16.86 | 25.91 (1) | 15.40 |
| Diamond Monster Fusion
(Banshee) 100x4.5 (450MHz) 128MB |
29.19 | 16.48 | 24.99 | 14.91 |
| Diamond Fusion
(Banshee)16mb Celeron 300a @ 450 . Abit BH6 mobo 128 megs Corsair ram |
29.11 | 15.52 | 23.30 | 14.76 |
| Monster V2 12MB Celeron 300A 112 x 4.5 = 504 128 MB PC-100 |
25.32 | 17.58 | 21.69 | 15.34 |
| STB 16 MB TNT
AGP 100 MHz bus x 4.5=450 128 MB SDRAM |
27.76 | 14.44 | 23.07 | 13.23 |
Note (1) Player Bubble settings apparently do not have any affect on framerate in this test due to the limited area of the ground covered during the benchmark. For this reason these scores reflect what this card/proc combo would have achieved had that test been run.
Copyright © 1997 - 2000 COMBATSIM.COM, INC. All Rights Reserved.
Last Updated April 12th, 1999