posted 10-30-2000 04:20 AM
I installed EEAH, applied 1.1,Then I started up EECH .I saw in the corner, in red, Apache havoc installed,I saw the EEAH missionns and so on were there. I Even flew them.But now I look and they are gone.How do I make it so they will always be there? I tried reinstalling EEAH and the patch.I'm sure I missed somthing.Any help would be appreciated.
Posts: 131 | From: waltham,ma usa | Registered: May 2000 | IP: Logged
Dakota01
Member
Member # 7610
posted 10-30-2000 04:32 AM
You have to install EEAH first then run the program once to complete the instalation, then patch it. I'm not sure if you need to run it again, but then you should install EECH.
Posts: 18 | From: Dayton, Ohio | Registered: Oct 2000 | IP: Logged
Vangelic
Member
Member # 6326
posted 10-30-2000 06:01 AM
I didn't find I had to re-install CH after AH. I already had CH installed. I installed AH, patched it using the patch on the CH CD, then ran AH once; after that, CH runs fine with all the AH scenarios present and correct. (If you download Flexman's Ground Support System, you can use it to claw back some disk space by deleting all the unnecessary AH files).
Posts: 35 | From: Birmingham, UK | Registered: Aug 2000 | IP: Logged
Hatch
Member
Member # 3238
posted 10-30-2000 06:17 AM
quote:Originally posted by Vangelic: I didn't find I had to re-install CH after AH. I already had CH installed. I installed AH, patched it using the patch on the CH CD, then ran AH once; after that, CH runs fine with all the AH scenarios present and correct. (If you download Flexman's Ground Support System, you can use it to claw back some disk space by deleting all the unnecessary AH files).
Exactly right. Patch EEAH then run once. Doesn't matter which you install first. Also, make sure to get the 1.4.5x patch from www.razorworks.com for the EECH. Some good fixes/enhancements in that one.
Posts: 246 | From: Orlando, FL , USA | Registered: Feb 2000 | IP: Logged
posted 10-30-2000 04:20 AM
