posted 05-12-2000 03:53 AM
Hi , I've got a Pentium III 450 mhz , 64 MB RAM and a sis 6326AGP 8 MB , the configuration utility recognizes my computer as a Pentium III 233mhz , the framerate is very slow , I've installed thepatch 1.02f , but still its the same , any help really apppreciated , thanks .
Posts: 2 | From: auckland | Registered: May 2000 | IP: Logged
Spetznaz
Member
Member # 2186
posted 05-12-2000 04:39 AM
I think the problem could be with Graphics card,check the make and then see if you can get some new drivers for it,if not put all the details of your card here and someone will give you an idea of what to do.Also make sure you have the latest version of DirectX Cheers Spetznaz
Posts: 35 | From: Perth, WA, Australia | Registered: Jan 2000 | IP: Logged
Leinad
Member
Member # 4687
posted 05-12-2000 05:06 AM
Did a DXdiagnosis , the results : Processor: Intel Pentium III, 450MHz Memory: 64MB RAM Page File: 67MB used, 1282MB available DirectX Version: DirectX 7.0 (4.07.00.0716) DX Setup Parameters: /PackageInstall DxDiag Version: 4.07.00.0700
Card name: SiS 6326 Manufacturer: SiS Chip type: 6326 Rev D2 DAC type: Internal Display Memory: 7.5 MB Current Mode: 800 x 600 (16 bit) (85Hz) Monitor: Plug and Play Monitor Monitor Max Res: 1600,1200 Driver Name: sis6326m.drv Driver Version: 4.11.01.1280 (English) DDI Version: 6 Driver Attributes: Final Retail Driver Date/Size: 6/21/1999 15:22:08, 161456 bytes Driver Certified: Yes VDD: *vdd Mini VDD: sis6326m.vxd Registry: OK
posted 05-13-2000 10:14 AM
Leinad, I agree with Spetznaz, make sure all driver's and DX is up to date. But I also think your card might be a little underweight in this class, can you upgrade? If you can, go with a least a 16mb graphic's card. That's pretty much bottom line for rescent sim's if you want good to excellent frame rates. I know the box states 8mb needed, but I alway's go by the "recommended" section. Also down the line, consider adding 64mb to your system memory for a total of 128mb, this will help greatly also. Hope everything work's out for you.
[This message has been edited by rsalo (edited 05-13-2000).]
posted 05-12-2000 03:53 AM
