|
|
This is our archive forum. It contains posts from 1999 to 2003. If you prefer, you may participate in our current COMBATSIM.COM Forum
|
|
 
|
|
Author
|
Topic: 32bit Rendering switch..where?
|
Two Bells
Member
Member # 997
|
posted 11-16-2000 03:38 AM
    
Hi AllI'm doing a series of tests on the new Prophet 3D GeForce2 Ultra and read a release note of the F4Patching utility that you could render in 32bit? I can't seem to find the command-line switch or the 'advanced' options in the setup/graphics section.
I've done a fresh Falcon4 install, updated it to 1.08 and then installed the Ibeta 3.0 Realism patch. Many thanks in advance.
Posts: 37 | From: | Registered: Nov 1999 | IP: Logged
|
|
Silverback
Member
Member # 882
|
posted 11-16-2000 04:12 AM
The 32 bit rendering and "advanced" options are all part of eRAZORS 1.0795 exe. You need to download it and THEN you can install it via F4Patch 2.11.
This makes F4 re-route to eRAZORS exe and then you'll have those options.
However, since it's a different exe than the 1.08US based one, none of the patches within F4Patch 2.11 will be applicable.The dat edits within RP3 will still be there though.. Check the readme for eRAZORS exe to see what fixes are incoporated. Also search the forum for additional info the new eRAZOR 1.0799 that's pending release together with the logn awaited RP4. Silverback
Stockholm, Sweden [This message has been edited by Silverback (edited 11-16-2000).]
Posts: 316 | From: Stockholm, Sweden | Registered: Nov 1999 | IP: Logged
|
|
|
|
|
Contact Us | COMBATSIM.COM Home
© COMBATSIM.COM, INC. All Rights Reserved.
Powered by Infopop Corporation
Ultimate Bulletin Board 6.04b
|
|
Home of the VMF-124 Death's Head Squad
|
